Jan 7, 2015
aneusomy I'm having the same trouble with my BlackVue 650-- GPS was never working over the month I purchased it (December). Funny thing is all of a sudden yesterday and today the GPS works, I've done nothing differently.
I wonder if they have a bug that prevented the GPS working depending on the month, or something stupid like that? It seems a lot of people with BlackVue's are having this GPS problem. Can I enquire if your GPS works now?
�
Jan 7, 2015
LuckyLuke My blackvue 500 usually has gps, but sometimes it doesn't. Problem is the bad reception of the signal, when the cam is placed outside it locks the signal very quickly but inside the car it's not that good (windscreen is probably shielding it a bit).�
Jan 7, 2015
Rheazombi I read somewhere that the GPS will be spotty unless you place the camera in that special spot on the windshield that people have been using for their EZ Passes.�
Jan 7, 2015
HankLloydRight That's true. I have my LUKAS 5900 mounted just below that area, and it only receives a GPS signal is the car is outside for at least a full day. So I know at least a partial signal is getting through. I may mount my EZpass in the nose cone and move the dashcam up to that open area for better reception.
On the other hand, when using the dashcam video for evidence, I might not want my actual speed to be included in the video evidence, so I'm happy to have it not pick up a GPS signal.�
Jan 8, 2015
JPP This is a well understood problem with the heavily coated/shielded Model S windshield and the GPS receiver in the Blackvue dash cam. Mine will go on and off more or less randomly. Sometimes if I do an SD card reformat in the camera, it will come back for a while. No biggie--I lose the GPS mapping on my videos, and also the MPH recording (...maybe not so good if it records me going above posted speed limit).�
Jan 12, 2015
scottm My dashcam is mounted where the speed on the dash is also caught in the video lower left corner of the frame.. no need for gps inputs to a dashcam, can see the REAL speed. the lens is 154 degree wide angle. Camera is suction mounted so it sits directly in front of the right half of the mirror... so it can't be seen by the driver.�
Jan 12, 2015
Xenoilphobe The GPS in my new BV 650 still doesn't work -- wish they didn't advertise it unless it has a functional antenna.�
Feb 13, 2015
aaronw I installed my BV550 right at the top to the right of my mirror so it doesn't affect the extra tweeter I have installed behind the mirror and I have no problems getting the GPS to work. My biggest problem turned out to be running the cable for the rear camera. I chose to run it down the A pillar and up the C pillar. The C pillar was a nightmare to put back in (Tesla did it thankfully) and getting through the cable guide into the hatchback was another hasle. I ended up having to whack off the end of the connector and installing a new MCX connector after feeding it through. Blackvue was no help either. I got no response after repeated requests for info.�
Feb 14, 2015
andrewket My 550 (or is it a 650? US dual camera) is not able to obtain a GPS fix mounted just to the right of the rear view mirror on a 12/2014 build. I've decided I don't care. However, my ez-pass is intermittent mounted just above the dashcam. This is annoying.�
Feb 15, 2015
hiroshiy My 650 is having problems with GPS too. It's slightly left of the rearview mirror (RHD). @aaronw, where did tou place 550? Exactly behind the mirror?�
Feb 15, 2015
aaronw I put it all the way at the top to the right of the mirror. The left edge of the camera is about 3 inches to the right of the right-side of the top of the rear-view camera bracket with the left side of the camera bracket about six inches from the top of the plastic mirror bracket.�
Feb 15, 2015
hiroshiy Thanks, yours seems further from the mirror than my installation, where my 650's right edge is at the mirror's left edge (RHD). Maybe I try to move one out.�
Feb 16, 2015
hiroshiy A little bit different topic, I'm experiencing LED traffic lights flickering in Tokyo, as our lights are on 50Hz. In western Japan the lights are on 60Hz.
I don't know why they are flickering lights (save energy??) but it seems that with Blackvue at 30 fps the lights may become completely black in western Japan. I also wondered the US use 60Hz too, and if this problem happens in LED lights area.
50Hz LED traffic lights in Tokyo - YouTube�
Feb 16, 2015
trils0n
LED's flicker because that's how they work, they don't emit constant light. They appear solid to the naked eye, but when recorded on video you can see the flicker, as the camera often takes a frame in the split second the LED is off. You can see this effect in the LED daytime running lights of other cars in the rear view camera of the Model S as well.�
Feb 17, 2015
hiroshiy So you don't have LED traffic lights?�
Jul 27, 2015
ks-man This thread has been a great read. Unfortunately the main thing I'm learning is that I'm just not technical/comfortable enough to do this on my own so I'm going to take my newly ordered Blackvue 650 2ch to a professional installer. It will certainly cost more but should look great and get done correctly. One thing I'm confused with is it sounds like most people here aren't using the male cigarette lighter end that comes with the unit. On the TeslaTap install instructions it makes note that there is voltage reduction circuitry and that you shouldn't cut off the cigarette lighter. Is this true? I haven't seen many people mention that they are using the male end of the cigarette lighter. I want to make sure I give all necessary instructions to the installer. Also, the one I ordered did come with the Power Magic Pro but it sounds like on Amazon a lot of people had problems with that box. Since this is a Tesla (huge battery available) am I correct that the Power Magic Pro isn't necessary and shouldn't be installed to avoid any issues with it?
Thanks.�
Jul 27, 2015
HankLloydRight Yeah, you don't need the power magic pro.�
Jul 27, 2015
JPP
The power cord for the Blackvue delivers 12v. Straight from the power source. Use a test meter to see for yourself.
You don't need the cigarette lighter plug. Note that this contains a built-in fuse and there is also a 2nd in line fuse, which you should leave in line.
I cut off the cigarette lighter plug but left the in-line fuse.
I lucked out as both my and my wife's have the open connector with always on 12v in the headliner above the microphone grille.
I did not fool with pins or connectors, but just stripped and 'tinned' the red & black leads on the Blackvue power cable, then popped open the connector in the headliner, laid the bare wires onto the proper pins, then snapped the connector closed.
No PowerMagic Pro needed.
Please search these forums for other posts on installation.�
Jul 28, 2015
ks-man Thanks. So what should I tell the professional installer? Should I tell him that he can cut off the cigarette lighter but make sure to leave the in line fuse? I'm just trying to make sure we don't do something wrong in light of the comment on Tesla Tap regarding the voltage reduction circuitry. If I just mention that will the installer understand the issue and what needs to be done?�
Jul 28, 2015
JPP Sorry--thought I was clear. Cut off the cigarette lighter plug. Leave the in-line fuse holder and fuse. Grab always on 12V from the connector in the headliner.
If your installer is having some difficulty with the 12v hookup, maybe you need a different installer.
Not sure where the whole 'voltage reduction' idea came from....�
Jul 28, 2015
HankLloydRight Many dashcams operate on +5VDC and not 12, so they require a step-down transformer, usually inside the cigarette adapter. If you chop that off and apply +12v to a dashcam expecting 5vdc, it might work, or it might release the magic smoke.�
Jul 28, 2015
steph280 yeah for 5v devices you will need something like this http://www.ebay.com/itm/Waterproof-DC-DC-Converter-12V-Step-Down-to-5V-Power-Supply-Module-3A-15W-BLACK-/221667524607?pt=LH_DefaultDomain_0&hash=item339c69ffff�
Jul 29, 2015
ks-man Now I'm confused again. The comment from Tesla Tap about voltage reduction circuitry is below. So should I tell the installer not to cut off the cigarette lighter? Does the Blackvue 650 operate on +12v or 5vdc? Do I not have to worry about any of this as the installer (who is well recommended) will be very familiar with how to wire the whole thing without issue? Also I should note that my car does not have the 12v connector in the headliner so he will have to wire it to either the ODBII port or the fuse box. I haven't discussed with him the installation yet so I don't know which he would prefer. Sorry for the confusion but as you can see I'm not too knowledgeable about all of this which is why I'm going to a professional installer and just want to be prepared for whatever might come up. Thanks.
From TeslaTap
NOTE: If you�re using the Blackvue dashcam, the 12V power connector has voltage reduction circuitry, so can�t just clip it off and wire the dashcam directly to 12V. You need to keep the large cigarette connector. We used a receptacle with wire leads to solve this such as Female Car Cigarette Lighter Socket, If you got the Power Magic Pro option, it includes a socket.
�
Jul 29, 2015
tinm A full-fledged camera system should not have to be an aftermarket choice for Tesla owners.
I want Tesla to offer a 4-camera system, front, left, right, rear, all in HD, digital recording, easy access via smartphone app and desktop (using MyTesla account on Tesla's own site), all as an optional package on the Design Studio page. I think it's ridiculous that owners have to resort to having to research, buy, and then hire on their own an outfit to do custom installations, some of which may put the car's warranty at risk.
In a Tesla factory-installed Camera Package I'd like to see modes where all 4 cameras record at full 30fps while car is on, with speed, direction, gps data also logged in sync; and when car is off, owner can specify a slower frame rate like 1fps, or just have the cameras record whenever there's motion.
If Tesla had offered such a Camera Package when I bought my S, I'd have definitely bought it. I'm not keen on going the Blackvue route. I want a factory solution not an aftermarket solution.�
Jul 29, 2015
lucy Tinm, you are so right. The cameras/sensors are probably in place already for the long promised Autopilot, why not let the primary user take a peak into the feed? So much better than having us mess up the wiring or interior of our new toys...�
Jul 29, 2015
Jeff N Agreed. Does any car company offer a dash cam system? It's just such an obvious option.
Has does anyone know if Elon has been asked about this in any public forums or in interviews?�
Jul 29, 2015
HankLloydRight Just talk to your installer -- if they're good, they'll know what to do. They'll know what voltage the device needs, and how to wire it in.�
Jul 29, 2015
mknox I connected mine to the 12v power up in the headliner over the weekend. Prior to that, I had been using the cigarette lighter adapter. When I cut the cord, the first thing I did was plug the cigarette lighter adapter back in and measure the voltage on the now exposed wires. I saw a full 12 volts (actually a bit more), exactly what I measured on the unused connector up in the microphone panel. So I just added a 1 amp in-line fuse and connected to the 12v up there. Seems to be working fine. I have the single camera Blackvue DR500GW-HD.�
Jul 29, 2015
mknox My Blackvue, as far as I could tell, didn't have any in-line fuse. It had the fuse in the lighter plug, though. I simply added my own 1-amp in line fuse when I wired it up in the microphone compartment. Where would this in-line fuse have been? I cut it off about 8" from the jack and threw the lighter socket and the rest of the wire in the trash.�
Jul 29, 2015
lagann I got mine installed for $150. They did amazing work and even the service center technician told me it looked really well done. Make sure to trash the Power Magic Pro, it's absolute garbage. I think they had it hooked up to the glovebox (but I could be wrong). If you have good installers they should get it all figured out correctly.�
Jul 29, 2015
JPP ...OK...1 more time....I have done 2 Blackvue installs personally, so have a bit of experience. But, just for fun, get out the power cable from the Blackvue, with the cigarette lighter plug. Insert it into your cigarette lighter 12V receptacle. Get out your trusty VOM and check the voltage at the right angle connector. Center pin +12v, metal shell ground. Got it?
Now, the power cord has a cigarette lighter plug attached. If you unscrew it, there is a fuse inside. Nothing more, nothing less. Cut off the cigarette lighter plug close to the end of the cable, and do NOT cut off or remove the 2nd black plastic bulge in-line along the power cord. This bulge, if you choose to snap it open, has a 2nd fuse--nothing more, nothing less.
Take the power cable where you cut it off. Strip back the black insulation, then strip the red and black wires. Hook these up to 12v (red to +12v, black to ground). Get your meter, and again test the right angle connector. Got 12V??
Blackvue is smart enough to give you 2 fuses, so that if you choose to hard wire, you still keep an in-line fuse. I personally would NOT hook up the camera without adding an in line fuse.
if your installer still does not understand the above, it's really hopeless......�
Jul 29, 2015
mknox I wonder if that's a regional thing. The power cord that came with my Blackvue DR500GW-HD absolutely did not have this bulge in the power cable. Only the fuse in the lighter plug.
- - - Updated - - -
Interestingly, my wires were red (+) and white (-).�
Jul 29, 2015
Mr X One of the first things im installing when I get mine.
Tesla should make them standard.�
Jul 30, 2015
JPP Hmmmmm...USA vs Canada....would be surprised that they would be different. FWIW I bought 2 units 2 years apart from US vendors, Blackvue 550 and 650, and both had the in-line fuse holder.�
Jul 30, 2015
brucet999 Maybe Canada version matches wire colors to the flag? Very bad luck if you need a three-wire circuit.
�
Jul 31, 2015
mknox LOL, yeah maybe that's it! What it did do was make me plug in the cigarette lighter end and verify with my multimeter that red was positive and white was negative. As an aside, I also was able to verify that it is 12v on the wires and not some stepped down voltage as speculated above. From there, I proceeded to wire in the piece with the jack in to the headliner circuit.�
Aug 1, 2015
ks-man I got my Blackvue 650 installed. It took a little longer than the installer thought it would be he eventually got everything working. I'm having two issues with the unit and was wondering if anybody here knew how to solve it. First I can't get the time to set correctly. I switched it to my timezone but it registers about 30 hours later than it really is. I'm guessing the issue is the spotty GPS coverage due to the Tesla shielding but I'm assuming other people have gotten the correct time to their Blackvues. Any idea how to do this?
Also, my phone (Galaxy Note 4) has an external sd card but whenever I try and save a video to my phone the only choice is the internal memory. Is anybody able to save videos to their external cards? The manual says when you hold the video you should get a choice for internal and external memory but I don't get that option.
Thanks for all the help.�
Aug 1, 2015
JPP The Tesla windshield is heavily shielded and a real problem with the GPS hardware/antenna in the Blackvue. In my 2013 S85, the Blackvue 550 locks onto GPS better than the 650 in my wife's 2015 S70D. You just basically need to be patient and eventually you will get a GPS lock (and see the blue LED on the back of the unit).�
Aug 1, 2015
ks-man I don't think the issue was the GPS. I guess the Blackvue uses the previously stored file to set the date and time. I formatted the card and it fixed the date and time issue. Still don't know how to save files to my external memory card. Also the glare when it is sunny is real bad.�
Aug 4, 2015
hiroshiy My installer said it's very difficult to find a good spot, both for GPS and for view angle. He said he placed the unit and let it lock on GPS, then sticked it to windshield. Also you can set the time with your smartphone app.�
Aug 4, 2015
seclinton Maybe you can add a polarizing filter?
Group Buy: Polarizer Filter(s) for Blackvue 650 Dashcam - 28% Off�
Không có nhận xét nào:
Đăng nhận xét